Building Equipments Corporation
SJX SERIES MANLIFT
Scissor type aerial work platform adopts the scissors-structure for its jacking-up mechanism, it is a sta
ble and spacious aerial work equipment and its being used world widely. SJY series scissor aerial
work platform has the futures of safe, economic and easy to operate. The rated load capacity is from
300kg-1000kg, and its height is from 3m up to 16m. SJY series manlift is semi-automatic, when using
this series manlift, user need to manually pull the unit the designated area and set it up with its 4 out
riggers steadily, then contact the power cable to power source and test the electrical-hydraulic jack-up
system. The operation is very easy, only “up” and “down” button to control the height.
Please see the following SJY models information, if you have special requirement for power supply,
platform size, load capacity and other aspect, please contact us for customized model.
SJX SERIES MANLIFT
SJX series scissor type aerial work platform is developed from SJY series, beside the electric-hydraulic
jack-up function, it has also auto walking function. Its widely used in the industries such as warehousing,
port loading and unloading, interior and exterior decorating, signage installation, electricity installa
tion.,etc. Compare to SJY series, this greatly saved the labor cost. It equipped with big capacity battery,
when its charged and delivered to site, it’s ready for operation already, no need to find power supply for
it and spend connect cable for supply. In case its low battery, only family use electricity 110V/200V sin
gle phase is enough to charge. SJX series manlift is popular and also economic for vertical lifting, only
one person can make it fully operational. This series manlift has load capacity from 300kg to 1000kg,
and maximum operation height from 6m up to 14m for user’s choice. If you have any special require
ment other than the following models, please consult us for customized model.
GTJ SERIES MAN LIFT
GTJ series man lift is a high efficiency lifting equipment developed based on the SJY series, it’s a more
stable, elegant and intelligent equipment. Its fully automatic operation, when jack up the platform, there
is no need to set up any out rigger, and when the platform is jacked-up, the unit can still walk with the
user operator control the driving system on the top. The steering wheel could turn up to 90°and the unit
is very flexible to move even in some limited area. There are some advanced technology applied to this
series manlift, even operate at slope with falling gradient less than 25%, the unit can be operational by
its auto balancing system; and once the falling gradient is more than 25%, the alarm system will beep
and stop the jack up automatically, only jack-down is allowed. This Series of man lift is popularly used in
hotel, warehouse, hospital, port area, and exterior/interior decoration and maintenance.
GTB SERIES MANLIFT
GTB series telescopic type aerial work platform is a kind of manlift mounted on truck. Its convenient to
mobilize in near and medium far place, the driving system adopts Cummins engine which is stable and
powerful. The load capacity is range from 230kg to 480kg, and maximum height can be reached is from
12m to 26.7m with a maximum work radius from 10.5m to 23.4m. GTB series manlift can be applied for
operation in ship factory, large work shop, electricity installation and maintenance site and any other
high rise work site, it is suitable to work in wet, hot, cold and dirty conditions. Its equipped with auto lev
elling device for basket and whole body, when its set up and body tilted more than 3%, the alarm will
beep and stop the boom stretching, same device applied to the basket when lifted on the top. Telescop
ic boom hydraulic system, slewing and travelling system can be operational simultaneously. When there
is any incident happening, there are emergency buttons at upper and lower control panel to stop all op
eration instantly. It adopts PLC and CAN control inter-act control system, wiring is simple but efficient,
and easy to maintain, all connection adopts aviation plug which is endurable and stable to use, the pro
tection grade reaches IP65.
GTJ SERIES MAN LIFT
GTZ series foldable jib aerial work platform is a kind of manlift which adopts foldable jib sections struc
ture for stretch out and draw back with hydraulic system, the operation is more flexible and it could fix
many occasions with special and complicated condition. This series of manlift has diesel engine type and
electric motor drive type for user’s choice, it can be applied in warehousing, hospital, exterior decora
tion, bridge formwork installation, electricity installation and maintenance, etc. This series of manlift is
equipped with auto balancing device for body and basket, speed sensor and interlock device, tempera
ture sensor/protector, Cummins engine, jib stretching stabilizer/buffer device. It adopts PLC and CAN
control system, up and down control panel both equipped with emergency button, In case there is inci
dent happening, press the emergency bottom, the whole will stop operation instantly. all key parts are
from world famous suppliers and it is suitable to work in hot, cold, wet and dirty conditions, protection
grade is IP65.
